The new generation of QUNDIS systems is your key to the future of consumption data acquisition. Our number one priority during development was to create more efficient processes for you. The result of our efforts is a perfectly coordinated system of heat cost allocators, heat meters and an innovative software platform.

You will find here the very latest information about generationQ.

13.09.2011

QUNDIS Roadshow will start in 4 week

In 2010 we presented our new device generation “generationQ”.

One year has passed and now is it so far: The start of the fully automatic series production of the new heat cost allocator Q caloric 5 took place.

Exactly the right time for the QUNDIS Roadshow this year.

Dates:

25.10. 2011 in Kaarst (near Düsseldorf)
26.10.2011 in Weinheim (near Mannheim)
27.10.2011 in Adelsried (near Augsburg)
08.11.2011 in Leipzig
09.11.2011 in Berlin Treptow
10.11.2011 in Hamburg

Please note: These presentations are in German.

You have questions? Please send an e-mail to roadshow2011(at)qundis.com.

13.09.2011

Q caloric 5 heat cost allocator – compatibility confirmed

It's official:

The compatibility of the new heat cost allocators Q caloric 5 to the generation devices WHE3/WHE4 and 20x has now been officially confirmed by the WTP Berlin and IGE Stuttgart.

25.07.2011

Q caloric 5 heat cost allocator –technical data sheet

Functionality, measuring principle, installation types, type summary and display loops – you can find these and more technical information about the new heat coast allocator
Q caloric 5 within the datasheet.

Download data sheet PDF (684 kB)

07.06.2011

Q caloric 5 has proven itself in test plants

For some weeks now, the first reference objects are equipped with the new
Q caloric 5 heat cost allocators.

Customer feedback for configuration, installation and reading of the devices is consistently very positive. The practical usage in the field has led to small optimization suggestions passed to us from customers. These were taken and implemented where possible.

With this newly revised version of equipment, we now are launching a 2nd round of reference installations.

Also formal approval process of the new heat cost allocators is now completed.
The corresponding registration numbers are as follows:

P2: A1.01.2011 (IGE – Stuttgart)

P3: C3.01.2011 (WTP – Berlin)

29.04.2011

Product brochure for new heat cost allocator
Q caloric 5 available

You or your customer are looking for a first overview about the new heat cost allocator
Q caloric 5?

Please have a look at the new product brochure.

Download brochure PDF (966 kB)

06.04.2011

generationQ - successful presentation on the ISH

On the ISH this year we presented our new product generation Q caloric 5 and Q heat 5.

National and international guests were highly interested in the new products.

The positive feedback of our visitors shows that we met the whishes and requirements of the market exactly with the development of the generationQ.

At the same time the Q caloric 5 - heat cost allocator works well in the first reference installations.

24.02.2011

Q caloric 5 - approval granted

A further important step towards market launch has been completed.

Following weeks of testing, where the new heat cost allocator family was thoroughly put through its paces, the test institutes WTP and IGE approved the devices for use in accordance with EN 834.

This was a novel procedure, because so far heat cost allocators have always only been inspected by one test institute, but in this case, the large number of variants and demanding time schedule resulted in a “job-sharing” agreement with the two institutes involved.

Now that approval has been granted, we can proceed with the next steps and install the first devices as “reference installations” for field tests for selected customers.

This final handling test by our customers is the concluding test phase.

10.02.2011

Invitation for technical seminar - Q caloric 5

You are welcome to learn more about the technical functionality of our new electronic heat cost allocators Q caloric 5.

Thus we want to offer a one-day-seminar in English at Frankfurt / Main on 31st of May 2011.

Start of the seminar: 9.00 a.m.
End of the seminar: around 3.00 p.m.

Each participant will receive a comprehensive starter package including programming adapter, heat cost allocator and installation manual.

You will find more information about the seminar and fees in our generationQ-flyer.

Sign up today! You will find the registration form here.

We are looking forward to see you!